Fabrics Q&A

Imported Japanese wet-laid non-woven fabrics are products produced using papermaking equipment and technology. The fiber raw materials placed in the water medium are opened into single fibers, and different fib…

Under the tensile force of the PTFE biaxially stretched film, the fibrils are pulled out from the PTFE resin particles. As the force increases, the length of the fibrils increases and the film becomes thinner. …

Japanese Ro reverse osmosis support cloth is made of chemical fibers and plant fibers on wet or dry paper machines using water or air as the suspension medium. Although it is cloth without spinning, it is calle…

The production method of polytetrafluoroethylene microporous membrane is to fully mix dry PTFE fine powder with additives, then enter the extruder, and the powder is pushed to squeeze out strips of PTFE, as sho…

Imported wet-laid non-woven fabrics are also called wet-laid non-woven fabrics. Wet-laid non-woven products are increasingly showing their importance nowadays. This process requires breaking the raw materials i…

PTFE biaxially stretched film can easily stretch out fibrils and nodes at a lower temperature (35°C), but when the strain reaches 25%, the base tape breaks and the tensile stress decreases rapidly; Stretching W…

Wet spinning is one of the main spinning methods of chemical fibers, referred to as wet spinning. Wet spinning includes the following steps: (1) Preparing the spinning solution; (2) Pressing the original soluti…

Suzhou New Material Technology Co., Ltd. is a high-tech enterprise specializing in the research, development and production of fluorine material membrane technology. The polytetrafluoroethylene microporous memb…

The biaxial stretching process of ptfe biaxially stretched film gives the film good void characteristics. After the film is stretched in different directions, the structure of the micropores and agglomeration o…