Fabrics Q&A

The filtration method of the filter is to use the filter element as the medium for filtration. The principle of filtration is to use physical or mechanical principles to create a pressure difference in the filt…

Industrial filters can use Teflon air filter membranes. The membrane is a three-dimensional mesh with no through holes and a cross microporous structure. It can capture most dust particles and prevent dust from…

The production process of the ptfe flat membrane manufacturer is to fully mix the dry PTFE fine powder with additives and then enter the extruder. The powder is pushed and extruded into strips of PTFE, as shown…

Using the swimming pool filter element to support the filter element made of non-woven fabric has very significant advantages: strong dirt holding capacity, large flow rate, high pressure resistance; very conve…

PTFE flat film can be used to make electrical insulation parts used at various frequencies, and can also be used to make gasket seals for various corrosion-resistant media containers and pipelines, to support s…

Teflon air filter membrane is a new type of air filter material. Air filters of this material are suitable for absorbing aerosols from air or other gases in clean rooms used in the semiconductor industry, and t…

PTFE bubble point film is made of dispersed PTFE resin powder as raw material and stretched through a series of special processes. It has a fibrillar microporous structure with a porosity of more than 85% and 1…

Due to the continuous development of industrial processes, the continuous improvement of people’s living standards, and the continuous improvement of environmental awareness and requirements, my country&#…

PP non-woven fabric is a kind of non-woven fabric. To put it simply: it is not interwoven and braided together by yarns one by one, but the fibers are directly bonded together through physical or chemical metho…