Comparison of PP and PET dry-laid non-woven materials in the United States: 1. PP raw materials are cheap, while PET raw materials are expensive.
PP waste can be recycled and reused, but PET cannot be recycled, so the cost of PP is slightly lower.
2. PP has a high temperature resistance of about 200 degrees, while PET is about 290 degrees. PET is more resistant to high temperatures than PP.
3. Non-woven printing, heat transfer effect, the same width of PP shrinks greatly, pet shrinks less, the effect is better, pet is more economical and wastes less.
4. The tensile force, tension, and load-bearing capacity of PET are greater than those of PP for the same weight.
65 grams of PET is equivalent to the tensile force, tension, and load-bearing capacity of 80 grams of PP.
5. From an environmental perspective, PP is doped with recycled PP waste, and PET is all new polyester chips. PET is more environmentally friendly and hygienic than PP.
American dry-laid non-woven fabrics have good high temperature resistance (polypropylene can be used in an environment of 150℃ for a long time, polyester can be used in an environment of 260℃ for a long time), aging resistance, UV resistance, high elongation, stability and It has the characteristics of good breathability, corrosion resistance, sound insulation, moth-proof, and non-toxic.
? American dry-laid non-woven fabrics for sale can be used in air filtration, wallpaper, ground protection, packaging, medical tape, swimming pool filters, desalination front-end treatment, cables, packaging, biofilm technology and other fields.
Our company has a complete service system, providing you with high-quality non-woven fabrics with thoughtfulness before sales, attentiveness during sales, and peace of mind after sales.
If you are interested, please click on the store to contact us.
</p
