For some special production processes, various technical indicators of the production environment must be reasonably controlled, which has become one of the current research hot spots in clean engineering.
To this end, ptfe microfiltration membrane manufacturers have developed and produced many filter materials, and U16 high-efficiency filter materials are one of them.
Cleanliness standards: For cleanroom filter cleanliness levels of 100, 10,000, and 100,000, three-stage filtration of primary, intermediate, and high-efficiency filters is required. For air purification of level 300,000, sub-high-efficiency filters can be used. filter instead of a high-efficiency filter.
ptfe microfiltration membrane manufacturer clean room FFU filter membrane has strong hydrophobicity, chemical resistance, waterproofness and low wind resistance, and can obtain high dust removal efficiency. For some 0.1um-0.3um diameter For extremely fine particles, the filtration level can reach H13-U16.
It can withstand acid and alkali erosion in the entire PH value range under continuous operating temperature of 240°C and instantaneous temperature of 260°C, does not absorb moisture, and can withstand ultraviolet radiation.
Suzhou New Material Technology Co., Ltd. is a PTFE microfiltration membrane manufacturer focusing on the R&D and production of PTFE composite materials. After years of painstaking research and R&D, the company not only has strong R&D strength, complete testing methods and domestic Advanced experimental equipment has also attracted a large number of outstanding technical talents.
</p
