The performance of filter materials is based on the different occasions they are used (such as temperature, corrosiveness, dust, etc.) Various corresponding requirements are provided to meet different needs. Today we will learn about Teflon H13 high-efficiency filter material.
The types of high-efficiency filters are generally divided into filters with partitions and filters without partitions. There is essentially no big difference between the two. Generally, filters with partitions are made of ultra-fine glass fiber or PTFE composite material as filter paper, aluminum foil as partitions, and a wooden frame or aluminum alloy frame. Its advantages are good filtration effect, low resistance, and large air volume. This filter is widely used in purification equipment and clean workshops.
Teflon H13 high-efficiency filter material has a fibrillar microporous structure, the porosity can reach more than 85%, there are 1.4 billion micropores per square centimeter, and the pore diameter ranges between 0.02um and 1.5um. , the filtration accuracy can reach U15 level (99.9995%) ~ U17 level (99.999995%), which can capture most dust particles so that dust cannot enter the membrane through the surface of the membrane.
The Teflon H13 high-efficiency filter material produced has strong hydrophobicity, chemical resistance, waterproofness and low wind resistance, and can obtain high dust removal efficiency. For some 0.1um-diameter Very fine particles of 0.3um, the filtration level can reach H13-U16. In addition, the biaxially stretched film can undoubtedly achieve ultra-low emissions in intercepting various types of dust generated during the company’s production process, and it fully complies with current environmental protection standards. Interested parties can enter the store to inquire and purchase! </p
