For ordinary friends, they generally think that filtering is to remove some particles that are visible to the human eye or Impurities are not exactly like this. A good filtration system must take into account the functions of filtration, purification, sterilization, circulation, etc. To fully meet the above conditions, it must have good filter materials. Here, the editor recommends eptfe bubble point film.
The single-pass filtration efficiency of PP HEPA on the market is relatively poor. Nowadays, people have portable PM2.5 detectors. Although they are not very accurate, they can roughly measure the PM2.5 pollution index. If PP HEPA is measured directly at the air outlet, the reading will be ugly. In order to avoid this problem, many manufacturers have begun to use PP compound HEPA.
Eptfe bubble point membrane is coated on various fabrics and substrates using a special process and can become a new type of filter material. Conventional filter materials carry dust that is easily adhered to, and the dust does not fall off easily during dust cleaning, resulting in low dust cleaning efficiency and short-term dust emission. Because the pore size of micropores is tens of thousands of times that of water molecules, it is hundreds of times smaller than water droplets. The high porosity and low filtration resistance of ptfe high-efficiency filter paper will not cause too much filtration resistance to the composite filter material.
Suzhou New Material Technology Co., Ltd. is a fluorine material film manufacturer that integrates the research, development, production and sales of PTFE air filtration membranes, PTFE bubble point membranes, eptfe bubble point membranes, Teflon films and coated filter materials. . The company has advanced PTFE film production lines, lamination and composite production lines, which are at the domestic advanced level. The company’s products are widely used in various fields. Interested parties can enter the store for consultation and purchase! </p
