eptfe bubble point membrane filters various bacteria



The so-called filtration refers to the use of various filter materials to remove dust and colloids in water or air , suspended solids, bacteria, dust and other harmful substances are removed to ensure clean wat…

The so-called filtration refers to the use of various filter materials to remove dust and colloids in water or air , suspended solids, bacteria, dust and other harmful substances are removed to ensure clean water quality and fresh air, and the use of eptfe bubble point membrane can satisfy this requirement.

Bubble point filter material.png

PP is a new filter material made of polypropylene through a special hot-melt method. It is the same material as the first-pass primary filter material melt-blown PP cotton in the water purifier, but the water purifier is made of It is in the shape of a tube, and PP is made into a cloth shape. By folding, it looks very similar to ultra-high-efficiency glass fiber HEPA. Some people in the industry cannot distinguish it clearly, and it is not easy to distinguish.

The use of eptfe bubble point membrane requires that the pore diameter can be between 0.1-1um, the thickness can be between 10-100um, the porosity can reach 50%-90%, and there are up to hundreds of millions of microorganisms per square centimeter. hole. Since the pore size of the microporous membrane is much larger than that of water vapor molecules, and the operating temperature can reach -150℃ – 250℃, the PTFE high-efficiency filter paper has excellent corrosion resistance, aging resistance and high temperature resistance. This membrane has the largest pore size on the market currently. Microporous organic membrane with high efficiency, corrosion resistance, aging resistance, high temperature resistance, waterproof, moisture permeability, good air permeability, and wide range of uses.

The eptfe bubble point film produced by the manufacturer uses imported raw materials, has a full set of advanced production equipment, an advanced clean room and an independent composite slitting workshop to ensure the production of ptfe film Quality; using production and testing instruments imported from the United States to test the quality of PTFE film, it has also passed international SGS testing and certification, and ISI testing and certification. Interested parties can enter the store and contact us. </p

This article is from the Internet, does not represent Composite Fabric,bonded Fabric,Lamination Fabric position, reproduced please specify the source.https://www.tradetextile.com/archives/7260

Author: clsrich

 
Back to top
Home
News
Product
Application
Search