With the development of smart hardware technology, consumer electronic products have entered thousands of households. There is a question for everyone. You may not know, how are electronic products protected? Electronic products need to be kept dry to prevent moisture from entering core components. Without treatment, moisture, mold and other dust particles enter electronic products with the air. The PTFE waterproof and breathable film will form a layer of water film on the surface of components and components, which will affect the operation of electronic components inside the electronic product. When external water molecules penetrate into the interior of the insulating material, swelling, deformation, strength reduction, etc. will occur, causing mechanical damage, thereby reducing the performance of the insulating material. In severe cases, leakage, short circuit or even failure may occur, causing electronic products to Loss of normal performance.
PTFE waterproof and breathable membrane is a new type of polymer waterproof material. The waterproof and breathable technology has much higher requirements than ordinary waterproof materials. PTFE solar module film is a semi-finished product of the film formed by extruding polytetrafluoroethylene rods and strips after calendering. It is stretched at a temperature below the melting point and heat-set to obtain a porous product. The porosity of the ptfe solar module film can reach more than 85%, and the air can flow smoothly. The membrane pore size is 0.2-3μm, and the size of the pore size can be adjusted according to needs. The small pore size can effectively isolate water, and the waterproof grade can reach IPX7 or above. Used in the protection of electronic instruments, it can prevent electronic instruments from becoming unusable due to moisture or water intrusion.
PTFE waterproof and breathable membrane technology has always been the core of the business, playing an indispensable role in cutting-edge fields such as biopharmaceuticals, medical devices, food and beverages, semiconductor processes, communications, etc., with pore-forming capacity ranging from 0.1 μm to 1μm, providing functional solutions such as fine filtration, bacteria and virus removal, waterproofing, breathability, and sound transmission. Interested parties are welcome to enter the store for consultation and purchase! </p
