Fabric Products,Fabric Information,Fabric Factories,Fabric Suppliers Fabric Information ptfe dust removal membrane for air pollutant emission filtration

ptfe dust removal membrane for air pollutant emission filtration



With the country’s strict requirements on air pollutant emissions from power plants, existing desulfurization and dust removal facilities have If you cannot meet the current standards, if you cannot achie…

With the country’s strict requirements on air pollutant emissions from power plants, existing desulfurization and dust removal facilities have If you cannot meet the current standards, if you cannot achieve up-to-standard emissions, you will be in danger of being shut down, which will have an adverse impact on the company. Therefore, it is necessary to research and apply environmental protection equipment technology. Here, the editor recommends PTFE dust removal membrane to everyone.

High efficiency filter material.png

Wet dust collector is a device that brings gas and liquid (usually water) into close contact, and uses the inertial collision of water droplets and particles and other effects to capture particles or increase the particle size. This type of purification device can not only remove dust, but also It can purify gas; it has high efficiency and can handle high-temperature and high-humidity gases (cooling), minimizing the possibility of fire and explosion. However, there is sludge during the treatment process; antifreeze equipment is required in winter; it is not suitable for purifying hydrophobic and hydraulic dust;

PTFE dust removal membrane is mixed, extruded, extruded, calendered, and bidirectionally stretched Made with special techniques such as stretching. Due to the characteristics of ptfe fibrillation, when uniaxial stretching (i.e. longitudinal stretching) is performed, the ptfe polycrystalline aggregates begin to extend and form some fibrils. The fibrils are parallel to the stretching direction and the length of the fibrils increases. ptfe The cross-section of fibrils is wide and thin, with the maximum width being about 100nm, and the smallest fibril being 0. 5 ~ 1. 0nm.

Suzhou New Material Technology Co., Ltd. is a manufacturer of ptfe air filter membranes , a fluorine material film manufacturer integrating R&D, production and sales of ptfe dust removal membranes, polytetrafluoroethylene films, Teflon films and coated filter materials. The company has advanced ptfe film production lines, coating and composite production lines, which are at the domestic advanced level . Interested parties can enter the store to inquire and purchase!</p

This article is from the Internet, does not represent Composite Fabric,bonded Fabric,Lamination Fabric position, reproduced please specify the source.https://www.tradetextile.com/archives/7131

Author: clsrich

 
Back to top
Home
News
Product
Application
Search