Fabric Products,Fabric Information,Fabric Factories,Fabric Suppliers Fabric Information Pore ​​size range of MBR wastewater treatment membrane

Pore ​​size range of MBR wastewater treatment membrane



So far, MBR sewage treatment membrane has shown great potential and is used correctly, providing a solid and reliable guarantee for the safety of the swimming pool environment. With the rapid development of soc…

So far, MBR sewage treatment membrane has shown great potential and is used correctly, providing a solid and reliable guarantee for the safety of the swimming pool environment.

Bubble point filter material.png

With the rapid development of social economy, a large amount of industrial wastewater, domestic sewage and aquaculture sewage are discharged below the standard, resulting in a significant increase in the content of N, P organic matter and other pollutants in the water body, leading to eutrophication of the water body. Seriously, the dissolved oxygen content is reduced, algae proliferate in large numbers, and the water body becomes black and smelly, which seriously damages the ecological structure of the water body, affects the ecological balance of the water body, and has a great impact on human health and the growth of animals and plants.

MBR sewage treatment membraneIt has a fibrillar microporous structure, a porosity of more than 88%, and 1.4 billion micropores per square centimeter. The pore size range is 0.1μm-0.5μm. This film is coated on various fabrics and substrates using a special process. It can become a new filter material. There are 1.4 billion micropores per square centimeter. This film is coated on a variety of fabrics and substrates using a special process. It can be used as a new type of filter material on various fabrics and substrates, which can effectively remove dust accumulated on the surface. The performance can be restored by washing with water or backflushing, and the service life can be greatly extended.

The MBR sewage treatment membrane produced by the manufacturer uses imported raw materials, has a full set of advanced production equipment, an advanced clean room and an independent composite slitting workshop. , ensuring the production quality of PTFE film; using production testing instruments imported from the United States to test the quality of PTFE film, and passing international SGS testing and certification, as well as ISI testing and certification. Interested parties can enter the store and contact us.

</p

This article is from the Internet, does not represent Composite Fabric,bonded Fabric,Lamination Fabric position, reproduced please specify the source.https://www.tradetextile.com/archives/6793

Author: clsrich

 
Back to top
Home
News
Product
Application
Search