All outdoor enthusiasts must have particularly high requirements for jackets. After all, jackets are important equipment to ensure that they are not wetted by rain and keep warm. Moreover, today’s jackets are more technologically advanced. Even if they are very thin and light, they can guarantee excellent water repellency and good breathability. The key is that even thin jackets can have a good thermal insulation effect. The technical secret contained in the jacket is the PTFE protective clothing fabric, which has both water-repellent and breathable properties.
The so-called professional waterproofing refers to whether you are sitting in a humid place or in any harsh natural environment, such as walking on In a windy and rainy environment, it can effectively block the intrusion of rain, frost and snow, preventing water from penetrating into the clothes and making you feel wet and cold. The so-called breathability means that the body naturally sweats when you perform heavy outdoor sports. , the skin exhales a large amount of moisture. If it cannot be quickly removed from the clothes, the sweat will be trapped between the body and the clothes, making people soaked. In rainy weather, it will make people feel even more humid and cold.
Especially in severe cold conditions such as mountains and canyons, body coldness and hypothermia are very dangerous. Therefore, good breathability of clothing is very important. You can try PTFE protective clothing fabric. The so-called windproof refers to the ultimate prevention of wind cooling effect. In a changeable natural environment, when cold wind penetrates our clothes, it will blow away a layer of warm air near our skin. This layer of warm air is about one centimeter thick, with a temperature of 34°C-35°C and a humidity of 40°C. Between %-60%. Even the smallest change in this layer of warm air can make us feel cold and uncomfortable. When cold wind blows into clothes, destroying this layer of warm air, resulting in rapid loss of heat and a drop in body temperature, we will immediately feel the slightest chill. This is the so-called wind cooling effect.
PTFE protective clothing fabricThe characteristic is that there are an average of 9 billion pores per square inch on this milky white film. The pores are twenty thousand times smaller than water droplets but seven hundred times larger than water vapor molecules. In this way, water droplets cannot penetrate into the pores, but sweat can penetrate the film and evaporate, achieving the dual purposes of water repellency and breathability. Interested parties can enter the store for consultation and purchase!
</p
