For a long time, U16 high-efficiency filter material has been widely used in air filters because of its special performance. The air filter is a key equipment in the purification air conditioning system. Through the step-by-step filtration of the filter, clean air is provided for the clean room. Its performance directly affects the air purification effect of the purification air conditioning system and the cleanliness level of the room. Therefore, it is necessary to select the appropriate air filter to purify the air conditioning system and ensure its reliable operation.
When selecting air filter materials, you must first determine the filtration efficiency of the terminal air filter according to the purification level requirements of the clean room. , Secondly, select the matching efficiency of the upper-level filters. When selecting filters, you should also consider resistance such as initial resistance, final resistance, dust holding capacity, etc. The final resistance is high, the service life is long but the air volume is large. Generally, the final and initial resistance ratio is considered to be 2. For air conditioning systems, filters with higher efficiency than designed should be used.
Although the one-time investment cost is large, it can avoid various disadvantages such as air duct obstruction and deterioration of fan performance. The result is to extend the life of the filter. Reduced cleaning times and significant cost savings.
The following points should be considered when selecting filter paper:
1. The useful filtering area is large. That is to say, the larger the use area of the filter paper, the larger the dust holding capacity, the smaller the resistance, and the longer the service life. Of course, the cost will also increase accordingly.
2. Fiber diameter The smaller the fiber diameter, the better the interception effect and the higher the filtration efficiency.
3. The higher the binder content in the filter material, the higher the tensile strength of the paper, the higher the filtration efficiency, and the less linting. The material has low dust accumulation and good resistance, but the resistance increases accordingly.
U16 high-efficiency filter material can meet the above needs. U16 high-efficiency filter material is based on dispersed Microporous membranes made of polytetrafluoroethylene resin are composited with various substrates. The filter material is characterized by surface filtration, which can improve filtration efficiency and adjust the problems of increasing filtration pressure and high concentration of fine dust emissions that often occur in traditional filtration methods. It has been widely used in many fields such as industrial dust removal, semiconductors, and photovoltaics. Interested parties can enter the store for consultation and purchase!
</p
