Reusable children’s mask ptfe filter material



The PTFE filter material for children’s masks is made of suspended polytetrafluoroethylene resin, which is molded, sintered, and cooled into a blank, and then turned and rolled. The membrane has small por…

The PTFE filter material for children’s masks is made of suspended polytetrafluoroethylene resin, which is molded, sintered, and cooled into a blank, and then turned and rolled.

The membrane has small pore size, uniform distribution and large porosity. While maintaining air circulation, it can filter all dust particles including bacteria to achieve purification and ventilation purposes.

The PTFE filter material of children’s masks is laminated on the mask using a special process, which can achieve 99.995% blocking of respiratory dust below 2.5 microns.

?Children’s mask ptfe filter material is mainly due to its use of materials with smaller fiber diameter compared with traditional masks.

Generally speaking, the fiber diameter of the ordinary non-woven material used in our traditional masks is more than 1000 nanometers, while the fiber diameter of the PTFE membrane is between 100 and 200 nanometers, which is much smaller than the above diameter. Therefore, it can very effectively block PM2.5 in the air, as well as some viruses, bacteria and particles that are invisible to the human eye.

Suzhou New Material Technology Co., Ltd. is a high-tech enterprise focusing on R&D, production and sales.

The products are produced using imported raw materials, with finer molecular weight, cleaner quality and better uniformity.

And we have a full set of advanced production equipment and testing instruments, as well as a complete pre-sales, sales and after-sales service system.

</p

This article is from the Internet, does not represent Composite Fabric,bonded Fabric,Lamination Fabric position, reproduced please specify the source.https://www.tradetextile.com/archives/12452

Author: clsrich

 
Back to top
Home
News
Product
Application
Search