Today we recommend a mask filter material, which is ptfe nano mask filter membrane, from the brand “”.
Under test conditions, its filtration efficiency can fully meet national standards.
The production process of melt-blown non-woven fabrics and needle-punched electrostatic cotton determines the non-uniformity of their fiber state. In addition, the electret component and the electret process also have difficulties in achieving absolutely uniform application and distribution of charges. Therefore, , non-uniformity of filter materials is the norm.
The roll is 1.6-2.4 meters wide and hundreds of meters long, and the usable area of each mask is about a small 20cm square.
Using mask products to measure the uniformity of filter material rolls exceeds the application requirements for air filtration.
The ptfe nanomask filter membrane is mainly due to its use of materials with smaller fiber diameters compared with traditional masks.
Generally speaking, the fiber diameter of the ordinary non-woven material used in our traditional masks is more than 1000 nanometers, while the fiber diameter of the PTFE membrane is between 100 and 200 nanometers, which is much smaller than the above diameter. Therefore, it can very effectively block PM2.5 in the air, as well as some viruses, bacteria and particles that are invisible to the human eye.
Suzhou New Material Technology Co., Ltd. is a fluorine material film manufacturer that integrates the research, development, production and sales of PTFE air filtration membranes, PTFE bubble point membranes, PTFE nano mask filters, Teflon films and coated filter materials.
The company has advanced PTFE film production lines, lamination and composite production lines, which are at the domestic advanced level.
</p
