PTFE flat film is a semi-finished product made from rods and strips extruded from PTFE, calendered into a film, stretched at a temperature below the melting point, and heat-set to obtain a porous product.
The flat membrane bioreactor can effectively remove the attachments on the membrane surface by adjusting the aeration intensity at the bottom of the component and the scouring effect of the air-water mixture on the membrane surface, even if the sludge viscosity is too high in the short term, etc. If factors cause deposition on the membrane surface, the diaphragm can also be taken out as a single piece, removed by flushing with a low-pressure water gun and then assembled back into the membrane module, so that the membrane can operate effectively for a long time. However, it is impossible for hollow fibers to pass through this Method cleaning.
Ultrafiltration technology is a high-tech technology widely used in the fields of water purification, solution separation and concentration, extraction of useful substances from wastewater, and wastewater purification and reuse.
It is characterized by simple use process, no need for heating, energy saving, low-pressure operation, and the device occupies a small area.
PTFE flat membranes are widely used in pure water and ultrapure water equipment, medical sterile pyrogen-free water equipment, industrial beverages, drinking water, mineral water purification, industrial separation, concentration, purification, industrial wastewater treatment, Electrophoretic paint, electroplating oily wastewater treatment.
Suzhou New Material Technology Co., Ltd. is a ptfe composite material manufacturer specializing in the research and development and production of polytetrafluoroethylene flat membranes. After years of painstaking research and research and development, the company not only has strong R&D strength and complete detection methods As well as domestic advanced experimental equipment, it has attracted a large number of outstanding technical talents.
</p
