Imported spunbond filament non-woven fabric is made of 100% pure fiber using acupuncture method to form a highly fluffy three-dimensional deep filter layer.
It is characterized by loose fiber structure and high porosity, which increases the amount of impurities that can be held. It is a compound interception mode that can effectively remove solid and soft particles. Larger particle impurities are trapped on the surface of the fiber, while fine particles are trapped on the surface of the fiber. Captured in the deep layers of the filter material.
Imported spunbond filament non-woven fabric has good heat resistance, with a melting point of 164~170℃, and the products can be sterilized at temperatures above 100℃.
It will not deform at 150℃ without being affected by external force.
The embrittlement temperature is -35°C. Embrittlement will occur below -35°C, and the heat resistance is not as good as PE.
It also has good chemical stability. In addition to being corroded by acids, it is relatively stable to various other chemical reagents. However, low molecular weight aliphatic hydrocarbons, aromatic hydrocarbons, etc. can soften and swell the non-woven fabric. Chemical stability It also improves with the increase of crystallinity.
The manufacturer advocates: continue to contribute to human health and social environmental protection, create a leading brand of membrane materials, and set an example for the field of new materials.
The company’s materials are all produced from imported raw materials, with finer molecular weight, cleaner quality and better uniformity. It has a complete set of domestically advanced production lines.
Interested parties can enter the store to contact or inquire.
</p
