Fabric Products,Fabric Information,Fabric Factories,Fabric Suppliers Fabric Information Environmentally friendly material ptfe waterproof breathable membrane

Environmentally friendly material ptfe waterproof breathable membrane



PTFE waterproof breathable membrane, as a new type of environmentally friendly material, completely breaks the tradition. It is not only waterproof but also has excellent breathable performance. PTFE waterproof…

PTFE waterproof breathable membrane, as a new type of environmentally friendly material, completely breaks the tradition. It is not only waterproof but also has excellent breathable performance.

PTFE waterproof and breathable membrane is made by special processes such as mixing, extrusion, extrusion, calendering, and biaxial stretching.

Due to the characteristics of ptfe fibrillation, when performing unidirectional stretching (i.e. longitudinal stretching), the ptfe polycrystalline aggregates begin to extend and form some fibrils. The fibrils are parallel to the stretching direction. At the same time, the fibrils The length increases.

The cross-section of ptfe fibrils is wide and thin, its maximum width is about 100nm, and the smallest fibril is ?0.5??1.0nm.

When the ptfe waterproof breathable membrane is in the state of water vapor, the water particles are very small, and these water particles can penetrate along the capillary tube to the other side, causing vapor permeability.

If water vapor condenses into water droplets, the particles will become larger, and the surface tension of the water droplets will act, and the water molecules will not be able to smoothly leave the water droplets, penetrate and reach the other side. In other words, this process This can prevent water penetration, making the waterproof and breathable membrane truly have a waterproof function.

The waterproof and breathable membrane has excellent breathability, corrosion resistance, aging resistance, high temperature resistance and other properties.

According to the usage requirements, the pore diameter can be between 0.1-10um, the thickness can be between 2-100um, the porosity can reach 50%–80%, and there are up to hundreds of millions of micropores per square centimeter.

Interested parties can enter the store to inquire and purchase! Suzhou New Material Technology Co., Ltd. has a complete service system, with thoughtfulness before sales, attentiveness during sales, and peace of mind after sales! The company can provide samples and arrange sales personnel for door-to-door service if there are other requirements.

</p

This article is from the Internet, does not represent Composite Fabric,bonded Fabric,Lamination Fabric position, reproduced please specify the source.https://www.tradetextile.com/archives/9817

Author: clsrich

 
Back to top
Home
News
Product
Application
Search