Swimming pool water is turbid due to sediment, clay, algae, microorganisms and certain organic matter. In order to reduce the turbidity of the pool water, the pool water must be coagulated, that is, coagulant is added to the water to remove small particles in the water. The turbidity is adsorbed and condensed into large particles, and finally sedimentation occurs, and the sedimentation is discharged out of the pool through the filter.
The core of these filters is made of swimming pool filter material.
The porosity of the swimming pool filter element filter material can reach 80%~90%, and it has been processed by high-temperature heat setting. The microporous structure is stable and high-temperature resistant. Because the melting point of polyester is around 260°C, it needs to be temperature-resistant. Under the environment, the stability of the shape and size of the non-woven fabric can be maintained.
It has excellent filtration, isolation, reinforcement and protection functions, high tensile strength, good permeability, high temperature resistance, freezing resistance, aging resistance, corrosion resistance, etc.
Can achieve 100% interception of various phages, bacteria and particles above 0.02um.
?PTFE microfiltration membrane manufacturer has a full set of advanced production equipment and technology, as well as an advanced clean room and an independent composite slitting workshop to ensure the production quality of PTFE membrane; the products produced The materials are all imported raw materials, with high uniformity, stable performance and good breathability! It can basically meet the filtration efficiency grade requirements of sub-high efficiency, high efficiency and ultra high efficiency filters.
We have a complete pre-sales, sales and after-sales service system.
Interested parties can enter the store to consult us.
</p