PTFE bubble point film is a material with excellent high temperature resistance, alkali resistance, oxidation resistance, hydrophobicity and non-adhesion properties.
This material is widely used in air purification, industrial dust removal, pharmaceutical fields, electronic appliances, clothing fields, etc.
MBR refers to a new sewage treatment device that combines ultra- and microfiltration membrane separation technology with bioreactors in sewage treatment.
This kind of reactor combines the advantages of membrane treatment technology and biological treatment technology.
Ultra and microfiltration membrane modules, as mud and water separation units, can completely replace the secondary sedimentation tank.
PTFE bubble point membrane has a microporous structure with staggered fibers. Through a biaxial stretching process and high-temperature heat setting treatment, the microporous structure is very stable and can effectively intercept dust particles.
The pore size of the material is small and the distribution is concentrated. Surface filtration is achieved to achieve a dust removal efficiency of 99.9%~99.999%. For some extremely small particles with a diameter of 0.1um-0.3um, it can better prevent fine dust from entering the filter material.
Can operate at a continuous operating temperature of 240°C and an instantaneous temperature of 260°C.
PTFE film manufacturer specializes in the production of PTFE bubble point film. It has a full set of advanced production equipment and technology. It also has an advanced clean room and an independent composite cutting workshop to ensure the production quality of PTFE film; the product materials produced are all Using imported raw materials, it has high uniformity, stable performance, good air permeability, and the filtration efficiency can reach 99.999995%! It can basically meet the filtration efficiency grade requirements of sub-high efficiency, high efficiency and ultra high efficiency filters.
</p
