Fabric Products,Fabric Information,Fabric Factories,Fabric Suppliers Fabric Information FFP3 mask filter material for European standard mask production

FFP3 mask filter material for European standard mask production



FFP is a European standard mask. It is a European standard mask that meets the European Standards Committee’s respiratory protective equipment certification standards. According to the tested particle pen…

FFP is a European standard mask. It is a European standard mask that meets the European Standards Committee’s respiratory protective equipment certification standards. According to the tested particle penetration rate of solid particle protective filter material, it can be divided into the following P1 (FFP1), P2 (FFP2), There are three levels of P3 (FFP3). Today we are going to introduce to you the ffp3 mask filter material.

Most anti-particulate masks are made of two layers of inner and outer non-woven fabrics, and a middle layer of filter cloth (melt-blown cloth); dust filtration mainly relies on the middle filter cloth. Since melt-blown cloth has its own electrostatic characteristics, Can absorb extremely small particles.

Since fine dust is adsorbed on the filter element, and the filter element is electrostatically charged and cannot be washed, the self-priming filter-type anti-particulate respirator needs to regularly replace the filter element.

The materials used in traditional masks have poor breathability. Wearing them for a long time will make you feel damp and hot, which is not good for your physical and mental health.

ffp3 mask filter material is a new type of mask with a single-layer nano-PTFE membrane as the core filter material. The fiber diameter of the membrane is between 100 and 200 nanometers, which can better prevent fine dust from entering the filter material, just like a layer of The artificial dust primary layer realizes surface filtration, making the dust removal efficiency reach 99.9%~99.999%, and even has a high dust removal efficiency for fine particles of PM2.5~PM10.

The ffp3 mask filter materials produced by the manufacturer are all imported raw materials, with a full set of advanced production equipment, an advanced clean room and an independent composite slitting workshop, ensuring the production quality of PTFE membrane; using American Imported production and testing instruments are used to test the quality of PTFE film, and have also passed international SGS testing and certification, as well as ISI testing and certification.

Interested parties can enter the store and contact us.

</p

This article is from the Internet, does not represent Composite Fabric,bonded Fabric,Lamination Fabric position, reproduced please specify the source.https://www.tradetextile.com/archives/9149

Author: clsrich

 
Back to top
Home
News
Product
Application
Search