PTFE dust mask membrane is a polymer waterproof material.
From a production point of view, the technical requirements of waterproof and breathable membranes are much higher than those of ordinary waterproof materials. From a quality point of view, it also has functional characteristics that other waterproof materials do not have.
The porosity of the film can reach more than 85%, and the air can flow smoothly.
The membrane pore size is 0.2-3μm, which can effectively isolate water points, and the waterproof grade can reach IPX7 or above.
The respiratory impedance of the ptfe dust mask film is only 60-70pa, and the ordinary melt-blown non-woven mask is as high as 120-250pa. In comparison, the breathability of the film mask is already very good, but it certainly cannot be compared with not wearing a mask. Compare.
The wearing comfort of a polytetrafluoroethylene film mask is mainly determined by the air permeability and moisture permeability of the mask.
Thin film masks have higher air permeability due to their material characteristics of high uniform distribution of holes; coupled with the moisture-proof and moisture-permeable characteristics of film materials, they can give users a more comfortable breathing experience.
The company has advanced ptfe film production lines, lamination and composite production lines, which are at the domestic advanced level.
The company’s products are widely used in various fields. We have a complete service system, caring before sales, attentiveness during sales, and assured after-sales! The company can provide samples and arrange sales personnel for door-to-door service if there are other requirements.
You are welcome to come to the company for inspection or enter the store to consult us at any time.
</p
