As more and more manufacturers join the market competition of filter materials, many new High-tech filter materials are springing up like mushrooms after a rain. Today we will introduce Teflon H13 high-efficiency filter material.
The most important thing in building a high-level clean room in an electronics factory is that the clean room should be able to meet the strict requirements of the production process for the production environment, so that it can produce high-quality electronic products with high efficiency and high yield. This is the most fundamental purpose of building a high-level clean room. Generally speaking, the temperature of electronic factories should be controlled at around 22°C, and the relative humidity should be controlled between 50-60% (special clean workshops have relevant temperature and humidity regulations).
Teflon H13 high-efficiency filter material has strong hydrophobicity, chemical resistance, waterproofness and low wind resistance, and can achieve high dust removal efficiency. For some 0.1um-0.3um diameter For extremely fine particles, the filtration level can reach H13-U16. It can withstand acid and alkali corrosion in the entire pH value range under continuous operating temperature of 240°C and instantaneous temperature of 260°C, does not absorb moisture, and can withstand ultraviolet radiation.
The Teflon H13 high-efficiency filter media produced by the manufacturer uses imported raw materials, has a full set of advanced production equipment, an advanced clean room and an independent composite slitting workshop, ensuring that ptfe The production quality of the film; production and testing instruments imported from the United States are used to test the quality of the PTFE film, and it has passed international SGS testing and certification, as well as ISI testing and certification. Interested parties can enter the store and contact us. </p
