Due to the frequent outbreaks of new respiratory diseases around the world, researchers have been prompted to develop more advanced medical masks to provide Stronger protection. This is where the polytetrafluoroethylene mask film came into being.
Melt-blown nonwoven fabric: Melt-blown nonwoven material uses high-speed hot air flow to draw the thin stream of polymer melt extruded from the die spinneret, thereby forming ultra-fine fibers and collecting them in It is condensed on the mesh curtain or roller, and at the same time it is bonded to itself to become a melt-blown nonwoven fabric. Spunlace nonwovens: Spunlace nonwovens spray high-pressure fine water onto one or more layers of fiber webs to entangle the fibers with each other, so that the fiber webs can be reinforced and have a certain strength. The resulting fabric is Spunlace nonwoven fabric.
The surface of the polytetrafluoroethylene mask membrane is composed of 100~200 nanofibers staggered into holes. After the fiber diameter is reduced to the nanometer level, the surface area increases, the pore size becomes smaller, and the pore volume increases, which can effectively block the PM2.5. It also has a fibrillar microporous structure with a porosity of more than 88%, 1.4 billion micropores per square centimeter, and a pore size range of 0.1μm-0.5μm. It has high barrier efficiency, long service life, and is light and breathable. It is the future development of masks. new direction.
Suzhou New Material Technology Co., Ltd. is a fluorine material company that integrates the research, development, production and sales of polytetrafluoroethylene mask film, ptfe bubble point film, polytetrafluoroethylene film, Teflon film and coated filter materials. Film manufacturer. The company has advanced PTFE film production lines, lamination and composite production lines, which are at the domestic advanced level. The company’s products are widely used in various fields. Interested parties can enter the store for consultation and purchase! </p
