There are endless filter materials on the market now. They are everywhere. People are dazzled and don’t know how to choose. Here, I recommendpolytetrafluoroethylene to everyone. Filter PaperLet’s take a look.
The principle of the filter cartridge dust collector is that the dust-containing gas enters the dust collector box through the air inlet, and the fine dust particles are absorbed by the filter cartridge. Various effects are blocked on the outer wall of the filter cartridge. The purified gas is discharged through the filter cartridge and through the air outlet of the box. As the use time increases, the dust adsorbed on the surface of the filter cartridge gradually increases, the air permeability of the filter cartridge weakens, and the resistance of the dust collector continues to increase. In order to ensure that the resistance of the dust collector is controlled within a limited range, the pulse controller sends a signal to sequentially open the pulse solenoid valve, so that the compressed air in the tank is sprayed from each nozzle of the blow pipe to the corresponding filter cartridge, causing an instantaneous impact in the filter cartridge. The gas expands, causing the dust accumulated on the outer wall of the filter bag to shake off and enter the ash hopper.
Welding fume collection device, welding exhaust gas collection equipment cartridge dust collector is a dry dust removal device, which is suitable for collecting fine, dry non-fibrous dust . The filter cartridge is made of polytetrafluoroethylene filter paper or non-woven felt. It uses the filtration effect of fiber fabric to filter dust-containing gas. When the dust-containing gas enters the filter cartridge dust collector, the particles are large and the specific gravity is Large dust will settle down due to gravity and fall into the ash hopper. When the gas containing fine dust passes through the filter material, the dust is blocked, thus the gas is purified.
The polytetrafluoroethylene filter paper currently independently developed and produced is the core material of the cartridge dust collector. The main products are HEPA and ULPA high-efficiency coatings. The membrane filter material adopts the world’s leading membrane production and thermal recovery technology. It has the characteristics of high filtration accuracy, low resistance and high resistance-to-efficiency ratio. It can be widely used in semiconductor, electronics, flat panel display, photovoltaic and other industries. Interested parties can enter the store and contact us.
</p
