The equipment that separates dust from flue gas is called a dust collector or dust removal equipment. The performance of the dust collector is expressed in terms of the amount of gas that can be processed, the resistance loss when the gas passes through the dust collector, and the dust removal efficiency. At the same time, the price, operation and maintenance costs, service life and difficulty of operation and management of the dust collector are also important factors when considering its performance. Choosing the right filter material is also very important. Here we recommend a new type of filter material –ptfe industrial dust removal filter material.
Pulse cartridge dust collector is a new type of filtration and dust removal device, which has high purification efficiency, small size and large filtration area. , good filtration effect, small pressure loss, long service life of the filter cartridge, quick and convenient installation and maintenance, and continuous use. The pulse cartridge dust collector is equipped with an air inlet, filter cartridge, air outlet, air bag, pulse controller, blow valve, blow pipe, etc. The filter cartridge is folded and rolled from polyester fiber, and its lower end is closed. The center of the upper end is directly opposite the lower opening of the blow pipe. After the dust-containing gas enters the dust collector from the air inlet, the air flow speed slows down, and the coarse particles break away from the air flow and settle into the dust collection chamber. When the fine dust passes through the filter cartridge with the air flow, it is blocked on the outer surface of the filter cartridge, and the clean gas is discharged from the air outlet; when When the dust layer on the surface of the filter cartridge is thick, the pulse controller issues a command to open the blow valve, and the compressed air in the air bag is sprayed out at high speed through the blow pipe. At the same time, the surrounding air, which is several times the amount of injected air, is induced to enter the filter cartridge and flow from the inside to the outside. Rapidly ejection blows the dust on the outer surface of the filter cartridge down into the dust collection chamber, and then is discharged from the ash hopper. The dust removal of the dust collector adopts pulse injection method, which not only achieves complete dust removal without damaging the filter cartridge, but also ensures the service life of the filter cartridge.
The ptfe industrial dust removal filter material currently produced is the core material of the pulse cartridge dust collector. It has high filtration efficiency, low operating resistance, high filtration speed, low operating cost, long service life, and is suitable for high-humidity working conditions. Surface dust can be removed through water washing or pulse backflushing to restore performance. PTFE industrial dust removal filter material can be widely used in various types of bag dust collectors, and has very broad application prospects in high-temperature corrosive flue gas dust removal fields such as waste incineration and power station boilers. Interested parties are welcome to enter the store and consult us.
</p
