The hot summer is the peak period of mosquito activity, especially at night. Without adequate protective measures, it is really impossible to sleep at night. In order to prevent mosquitoes, most families use mosquito nets, which are energy-saving and environmentally friendly. They completely isolate mosquitoes and are quite effective. Today’s mosquito nets are basically foldable and need to be supported by themselves. How to put away a folding mosquito net? How to clean folding mosquito nets? Let’s find out together!
1. How to put away a folding mosquito net
1. First pull both ends of the bottom of the mosquito net;
2. Then fold one end of the mosquito net toward the middle. Do the same at the other end;
3. Then fold the upper end down. (Because the upper and lower sides of the mosquito net can be folded when connected);
4. Then tighten all the eight hoses. Just tie it tightly;
5. If it does not contain hoses or copper pipes, just take it off and fold it.
2. How to clean folding mosquito nets
1. First remove all the hooks of the mosquito net, and then soak it in a basin. Be careful not to put too much water, otherwise the water will overflow when you rub it.
2. Pour a little shampoo into the basin and stir evenly until foam appears. You can use any leftover shampoo or expired shampoo here, but don’t put too much, otherwise rinsing will be very troublesome.
3. After soaking for about 10 minutes, you can rub it with your hands and wash it. Do not rub it, otherwise it will damage the mesh of the mosquito net. yarn density.
4. Rinse repeatedly with clean water, and then hang to dry.
5. After drying, flatten and fold it for easy use next time. Never store it in a ball.
6. When hanging the mosquito net, you should first stretch it, and then hook the hooks one by one. Do not stretch too hard to avoid Break the mesh.
3. How to install a folding mosquito net
1. When installing the yurt mosquito net, first prepare all the installation materials needed to facilitate subsequent work. Mosquito net cloth is a must, as well as two support poles, some buttons, etc. These are what we need to prepare.
2. Then start preparing the support poles. Generally, the purchased yurt mosquito net has two support poles. We need to connect the support poles of these two yurt mosquito nets into a complete pole. The purpose of the entire pole connecting the yurt mosquito net is to support the mosquito net when the yurt mosquito net is installed later.
3. Spread the purchased mosquito net on the ground. When spreading it, pay attention to placing the mosquito net top up and bottom down. *Spread out. When installing, place the two support poles crosswise on the mosquito net, and compare the lengths to see if they are suitable.
4. Next we can assemble the yurt mosquito net, and insert the pillar poles we have just prepared into the yurt mosquito net. . It should be noted that the two support poles are inserted into the mosquito net crosswise.
5. Once this step is completed, you are basically done. The next thing to do is to fit the four pillar heads and the four corner buckles at the lower end of the mosquito net. After finishing, just cross-knot the rope fixed at the top of the mosquito net with the two pillars and fix it.
Recommended reading: How to hang a mosquito net without brackets
The above is the relevant content about How to put away folding mosquito nets and how to clean folding mosquito nets. I hope it will be helpful to everyone! China’s well-known large-scale decoration platform and leading decoration brand. If you want to think about itFor decoration design, it is recommended that you apply for professional design services. Professional designers can help you plan a reasonable space layout and exquisite design through on-site room measurement.
>>Click here to get professional designer* room design
